Description
Organize loose TV, computer, office and AV cords with the A-7024 20mm spiral cable wrap.
The flexible black wrap groups compatible cables into one cleaner bundle. Its open spiral design allows individual cords to enter or leave the bundle at different points, while the included cable-loading clip helps guide the wrap around the cables.
| Model / SKU | A-7024 |
|---|---|
| Product Type | Open spiral cable wrap |
| Nominal Size | 20 mm / approximately 0.79 in. |
| Length | 1.5 m / approximately 4.9 ft |
| Colour | Black |
| Installation Accessory | Cable-loading clip included |
Cable Management for Smaller Bundles
The 20 mm A-7024 is the smallest of the available 20 mm, 25 mm and 30 mm spiral-wrap sizes. It is suited to compatible smaller cable bundles behind a television, computer monitor, desk, media cabinet or office workstation.
The wrap keeps cables grouped without attaching them permanently to a wall or desk. This makes it useful where equipment may be moved, upgraded or rewired later.
Key Features
- 20 mm nominal size for compatible smaller cable bundles
- 1.5 m length covers approximately 4.9 feet
- Open spiral construction provides a flexible cable route
- Individual cables can branch out along the bundle
- Included loading clip helps guide installation
- Can be shortened to suit the required cable-run length
- Flexible and reusable when cable layouts change
- Black finish coordinates with common AV and computer cables
- Suitable for compatible home, office and entertainment setups
Open Spiral Design
Unlike a closed zipper sleeve, spiral wrap uses overlapping sections that surround the cable bundle. This design allows one cable to exit before the end of the main route without cutting a separate opening.
For example, a monitor cable can leave the bundle near the display while the remaining USB, network and power-related cords continue toward the desk or equipment cabinet.
| Organizer Type | Best Application |
|---|---|
| Spiral Cable Wrap | Flexible bundles with cables entering or leaving at different points |
| Fabric Zipper Sleeve | A softer enclosed bundle accessed through a zipper seam |
| Wall Raceway | A fixed surface-mounted cable route on a wall or ceiling |
| Floor Cord Cover | A protected route where cables cross a suitable floor area |
Common Applications
| Application | Typical Cable Types |
|---|---|
| Computer Desk | Keyboard, mouse, monitor, USB and network cables |
| TV and Media Setup | HDMI, network, optical and other compatible AV cables |
| Office Workstation | Monitor, docking-station, charger and data cables |
| Gaming System | Display, controller, console and USB leads |
| Small AV System | Audio, control and signal cables sharing one route |
Choose the Correct Wrap Size
Choose the wrap according to the combined thickness of the complete cable bundle, not only the number of cables. One thick cable may use more space than several thin USB or speaker leads.
Arrange the cables in their intended position and measure the bundle before ordering. Do not force an oversized bundle into the 20 mm wrap.
| Model | Size | General Selection |
|---|---|---|
| A-7024 | 20 mm | Smaller compatible cable bundles |
| A-7026 | 25 mm | Medium compatible cable bundles |
| A-7028 | 30 mm | Larger compatible cable bundles |
Installation
- Arrange the cables together in their intended route
- Confirm that the bundle is suitable for the 20 mm wrap
- Place the cable bundle into the included loading clip
- Guide the spiral wrap around the beginning of the bundle
- Move the clip along the cables to continue wrapping the bundle
- Allow individual cords to exit between spiral sections where needed
- Cut off unused wrap only after confirming the final length
- Check that cables are not crushed, sharply bent or pulled under tension
Use and Safety Notes
- Follow the minimum bend radius specified for each cable
- Do not force oversized connectors through the loading clip
- Leave enough cable slack for movable equipment or adjustable desks
- Keep cables away from sharp edges and hot surfaces
- Do not wrap damaged, overheating or unsuitable cords
- Use wall raceway for a fixed wall-mounted cable route
- Use a suitable floor protector where cables cross a walking area
Technical Specifications
| Model / SKU | A-7024 |
|---|---|
| Product Type | Open spiral cable wrap |
| Nominal Size | 20 mm / approximately 0.79 in. |
| Length | 1.5 m / approximately 4.9 ft |
| Colour | Black |
| Cut to Length | Yes |
| Reusable | Yes |
| Published Material | Not specified |
| Published Cable Capacity | Not specified—measure the cable bundle |
What’s Included
- 1 × black 20 mm spiral cable wrap, 1.5 m long
- 1 × cable-loading clip
Frequently Asked Questions
Is this a zipper cable sleeve?
No. The A-7024 is an open spiral cable wrap supplied with a cable-loading clip.
How long is the cable wrap?
It measures 1.5 metres, equal to approximately 4.9 feet.
Can it be cut shorter?
Yes. It can be shortened after the required installation length has been confirmed.
Can a cable exit partway along the bundle?
Yes. A cable can pass between suitable openings in the spiral wrap.
How many cables will fit?
No exact cable-count rating is published. Fit depends on cable thickness, stiffness, connectors and bundle arrangement.
Can it be used across a floor?
It is not a traffic-rated floor cable protector. Use a suitable floor cord cover where cables cross a walkway.
Complete Your Cable Installation
Compare spiral-wrap sizes or browse wall cord covers, HDMI cables and speaker wiring.
25 mm Cable Wrap 30 mm Cable Wrap Paintable Wall Cord Cover Cable Management HDMI Cables Speaker Cables
