Description
Bundle loose TV, computer, office and AV cables with the A-7026 25mm spiral cable wrap.
This flexible black wrap groups several compatible cords into one cleaner cable run. Its open spiral design lets individual cables enter or leave the bundle at different points, while the included loading clip helps guide the wrap around the cables.
| Model / SKU | A-7026 |
|---|---|
| Product Type | Open spiral cable wrap |
| Nominal Size | 25 mm / approximately 0.98 in. |
| Length | 1.5 m / approximately 4.9 ft |
| Colour | Black |
| Installation Accessory | Cable-loading clip included |
Flexible Cable Management for Medium Bundles
The A-7026 provides a practical middle size between the 20 mm and 30 mm spiral wraps. It is suitable for compatible medium cable bundles behind televisions, computers, desks, media cabinets and office equipment.
Because the wrap moves with the cable bundle instead of attaching permanently to a wall, it is useful where equipment may be rearranged, upgraded or replaced later.
Key Features
- 25 mm nominal size for compatible medium cable bundles
- 1.5 m length covers approximately 4.9 feet
- Open spiral construction creates a flexible cable route
- Individual cables can branch out at different points
- Included loading clip helps simplify installation
- Can be shortened for a custom cable-run length
- Flexible and reusable when cable layouts change
- Black finish coordinates with common AV and computer cords
- Suitable for compatible home, office, studio and media setups
Open Spiral Design
The overlapping spiral sections wrap around the cables without fully sealing the bundle. This allows selected cables to leave the main route before reaching the end.
For example, a monitor cable can branch toward a display while the remaining USB, network and equipment cables continue toward the computer or power area.
| Organizer Type | Best Application |
|---|---|
| Spiral Cable Wrap | Flexible bundles with cables entering or leaving at different points |
| Fabric Zipper Sleeve | A softer enclosed bundle accessed through a zipper seam |
| Wall Cord Cover | A fixed surface route for compatible wall or ceiling cables |
| Floor Cord Cover | A protected cable path across a suitable floor area |
Common Applications
| Application | Typical Cable Types |
|---|---|
| Computer Desk | Monitor, keyboard, mouse, USB and network cables |
| TV and Media Cabinet | HDMI, network, optical and other compatible AV cables |
| Office Workstation | Monitor, docking-station, charger and data cables |
| Gaming Setup | Display, console, controller, USB and network leads |
| Recording or AV System | Audio, control, data and signal cables sharing one route |
Choose the Correct Cable-Wrap Size
Select the spiral wrap according to the combined thickness of the complete cable bundle rather than the number of cables alone.
A thick HDMI or power cable may require more space than several thin USB, network or speaker cables. Arrange and measure the intended bundle before selecting a size.
| Model | Size | General Selection |
|---|---|---|
| A-7024 | 20 mm | Smaller compatible cable bundles |
| A-7026 | 25 mm | Medium compatible cable bundles |
| A-7028 | 30 mm | Larger compatible cable bundles |
How to Install the Spiral Wrap
- Arrange the cables in their intended route
- Confirm the cable bundle is suitable for the 25 mm size
- Place the cable bundle into the included loading clip
- Guide the beginning of the spiral wrap around the cables
- Move the clip along the bundle to continue wrapping
- Allow selected cables to exit between spiral sections where required
- Cut off unused wrap only after checking the final route
- Confirm that no cable is crushed, sharply bent or pulled under tension
Installation and Use Notes
- Follow the minimum bend radius specified for every cable
- Do not force an oversized bundle into the wrap
- Do not force large connectors through the loading clip
- Leave sufficient cable slack for adjustable or movable equipment
- Keep the bundle away from sharp edges and hot surfaces
- Do not bundle damaged or overheating cables
- Use wall raceway when a fixed wall-mounted cable route is required
- Use a suitable floor cord cover where cables cross a walking area
Technical Specifications
| Model / SKU | A-7026 |
|---|---|
| Product Type | Open spiral cable wrap |
| Nominal Size | 25 mm / approximately 0.98 in. |
| Length | 1.5 m / approximately 4.9 ft |
| Colour | Black |
| Flexible | Yes |
| Reusable | Yes |
| Cut to Length | Yes |
| Published Material | Not specified |
| Published Cable Capacity | Not specified—measure the cable bundle |
What’s Included
- 1 × black 25 mm spiral cable wrap, 1.5 m long
- 1 × cable-loading clip
Frequently Asked Questions
Is this a zipper cable sleeve?
No. The A-7026 is an open spiral cable wrap supplied with a cable-loading clip.
How long is the spiral wrap?
It measures 1.5 metres, equal to approximately 4.9 feet.
Can it be cut shorter?
Yes. The wrap can be shortened after the required installation length has been confirmed.
Can a cable exit partway along the bundle?
Yes. Individual cables can pass between suitable openings in the spiral wrap.
How many cables will fit?
No exact cable-count rating is published. Capacity depends on cable diameter, connectors, stiffness and bundle arrangement.
Can it protect cables across a floor?
It is not a traffic-rated floor protector. Use a suitable floor cord cover where cables cross a walking area.
Complete Your Cable Installation
Compare spiral-wrap sizes or browse wall cord covers, AV cables and related cable-management accessories.
20 mm Cable Wrap 30 mm Cable Wrap Paintable Wall Cord Cover Cable Management Cables & Wiring Speaker Cables
