Description
Bundle loose TV, computer, office and AV cables with the TEXONIC A-7028 30mm spiral cable wrap.
The flexible black wrap groups several compatible cords into one organized cable run. Its open spiral design allows individual cables to enter or exit along the route, while the included loading tool helps guide the cable bundle into the wrap.
| Brand / SKU | TEXONIC A-7028 |
|---|---|
| Product Type | Spiral cable wrap |
| Nominal Diameter | 30 mm / 1.18 in. |
| Length | 1.5 m / approximately 4.9 ft |
| Colour | Black |
| Installation Tool | Cable-loading clip/tool included |
Organize Multiple Cables into One Bundle
The A-7028 turns a group of separate cords into one cleaner cable run. It is useful behind televisions, computers, monitors, desks, media cabinets and other areas where several cables travel in the same direction.
Unlike permanent raceway, the spiral wrap does not attach to the wall. It remains flexible with the cable bundle, making it practical where cords may need to move or equipment may be changed later.
Key Features
- 30 mm nominal diameter for larger compatible cable bundles
- 1.5 m length covers approximately 4.9 feet
- Open spiral construction provides a flexible cable route
- Individual cords can branch out at different points
- Included loading tool simplifies cable insertion
- Can be shortened for a custom installation length
- Reusable when equipment or cable layouts change
- Black finish coordinates with common AV and computer cables
- Suitable for compatible home, office, studio and equipment setups
Spiral Wrap Instead of a Closed Zipper Sleeve
A fabric zipper sleeve opens along one seam and normally encloses the entire bundle. The A-7028 uses overlapping spiral sections that wrap around the cables.
The spiral format is especially useful when a keyboard cable, monitor cable, USB lead or another cord must leave the main bundle before the end of the run. The cord can pass through an opening between the spiral sections without cutting a separate exit hole.
| Organizer Type | Best Use |
|---|---|
| Spiral Cable Wrap | Flexible bundles with cables entering or leaving at different points |
| Fabric Zipper Sleeve | A softer enclosed bundle with access through a zipper seam |
| Wall Raceway | A fixed surface-mounted cable route on a wall or ceiling |
| Floor Cord Cover | Cables crossing a floor or pedestrian route |
Common Applications
| Application | Typical Cables |
|---|---|
| TV and Media Cabinet | HDMI, network, optical, USB and compatible power cords |
| Computer Desk | Monitor, keyboard, mouse, network and peripheral cables |
| Gaming Setup | Display, console, controller, USB and network leads |
| Recording or AV System | Audio, control, data and equipment cables following one route |
| Office Workstation | Docking-station, monitor, charger and network cables |
Choosing the Correct Diameter
The 30 mm model is the largest of the currently listed 20 mm, 25 mm and 30 mm black wraps. Select the size according to the combined cable bundle rather than the number of cords alone.
A thick HDMI cable, moulded connector or power cord can require much more room than a thin USB or speaker cable. Arrange and measure the complete bundle before ordering.
| Size | Length | General Selection |
|---|---|---|
| 20 mm | 1.5 m | Smaller compatible cable bundles |
| 25 mm | 1.5 m | Medium compatible cable bundles |
| 30 mm | 1.5 m | Larger compatible cable bundles |
How to Install the Spiral Cable Wrap
- Disconnect equipment when required for safe cable handling
- Arrange the cables together in their intended route
- Place the cable bundle inside the included loading tool
- Feed the end of the spiral wrap through the tool
- Move the tool along the bundle so the wrap closes around the cables
- Allow individual cords to exit between spiral sections where needed
- Cut off unused wrap only after confirming the final length
- Check that no cable is sharply bent, crushed or pulled under tension
Installation and Use Notes
- Follow the minimum bend radius specified for each cable
- Do not force oversized connectors through the loading tool
- Leave enough slack for adjustable desks and movable equipment
- Keep the bundle away from sharp edges and hot surfaces
- Do not tightly compress damaged or overheating cords
- Use a wall raceway when a fixed wall-mounted route is required
- Use a rated floor cord cover wherever cables cross a walking area
Technical Specifications
| Brand | TEXONIC |
|---|---|
| SKU | A-7028 |
| Product Type | Open spiral cable wrap |
| Nominal Diameter | 30 mm / 1.18 in. |
| Length | 1.5 m / approximately 4.9 ft |
| Colour | Black |
| Cut to Length | Yes |
| Reusable | Yes |
| Published Material | Not specified |
| Published Cable Capacity | Not specified—measure the cable bundle |
What’s Included
- 1 × 30 mm black spiral cable wrap, 1.5 m long
- 1 × cable-loading tool/clip
Frequently Asked Questions
Is this a fabric sleeve with a zipper?
No. It is an open spiral wrapping band installed around cables with the included loading tool.
How long is the cable wrap?
It is 1.5 metres long, equal to approximately 4.9 feet.
Can it be cut shorter?
Yes. The wrap can be shortened after the required cable-route length has been measured.
Can cables exit in the middle of the wrap?
Yes. Individual cables can pass between the spiral sections at suitable points along the bundle.
How many cables will fit?
No exact cable-count rating is published. Capacity depends on cable thickness, connector size and bundle arrangement.
Can it be used across a floor?
It should not be used as a traffic-rated floor protector. Use a suitable floor cord cover where cables cross a walkway.
Complete Your Cable Installation
Compare spiral-wrap sizes or browse wall raceways, HDMI cables and speaker wiring.
20 mm Cable Wrap 25 mm Cable Wrap Paintable Wall Cord Cover Cable Management HDMI Cables Speaker Cables
