null

A PROUD CANADIAN BUSINESS FOR OVER 30+ YEARS!

DVX10 Glass Wall Shelf for AV Components

No reviews yet Write a Review
SKU:
DVX10
Sale • Save 50%
$39.99
$19.99
Shipping:
Calculated at Checkout
$39.99
$19.99

Description

Keep media equipment close to your television without adding a large entertainment cabinet with the DVX10 glass AV wall shelf.

Its spacious 17.5 × 13-inch tempered-glass platform provides a dedicated location for compatible cable boxes, media players, network devices, compact game consoles and other AV components. Integrated cable management helps guide connected wires toward the wall for a cleaner home theatre or commercial display setup.

Check equipment fit: Confirm the device dimensions, total weight, ventilation needs and cable positions before ordering. The maximum supported load is 8 kg or 17.8 lb when the shelf is correctly installed.
Shelf Dimensions 17.5 × 13 in / 450 × 330 mm
Maximum Load 8 kg / 17.8 lb
Glass Thickness 5 mm / 0.2 in
Listed Height Approximately 9 inches
Shelf Material Black tempered glass
Cable Organization Integrated cable-management system

Spacious Wall-Mounted Shelf for AV Components

The DVX10 provides a wider and deeper platform for AV equipment that may not fit comfortably on a compact media shelf. Its 17.5-inch width and 13-inch depth offer useful space for many home-entertainment and business-display components.

Mounting the equipment on the wall keeps it near the television while helping free space on desks, counters and entertainment furniture. The open shelf also leaves front controls, remote sensors and rear connections accessible.

Key Features

  • Generous 17.5 × 13-inch surface for compatible AV equipment
  • Supports equipment weighing up to 8 kg or 17.8 lb
  • 5 mm tempered-glass platform provides a stable support surface
  • Wall-mounted design helps save furniture and floor space
  • Open layout keeps controls, indicators and connections accessible
  • Integrated cable management helps organize connected wiring
  • Black finish coordinates with televisions and AV components
  • Suitable for home entertainment and commercial display areas
  • Installation hardware and instructions are included

17.5 × 13-Inch Equipment Platform

The shelf measures approximately 450 mm wide by 330 mm deep. The 13-inch depth provides room for many components with larger housings, equipment feet or rear cable connections.

Measure the complete device, including controls, connectors and cable plugs. Equipment should sit securely on the glass without unstable overhang or blocked ventilation openings.

Measurement reminder: Manufacturer dimensions may not include connected HDMI, power or network plugs. Allow additional space behind the equipment where required.

Compatible Equipment Examples

The DVX10 can support many types of electronic equipment when the device fits securely and remains within the published load limit.

EquipmentTypical Use
Cable or Satellite Receiver Position a receiver close to a wall-mounted television
Streaming Media Player Keep the player, remote sensor and cables accessible
DVD or Blu-ray Player Support a compatible disc player with front-loading access
Compact Game Console Organize compatible gaming equipment near the display
Router or Network Device Elevated placement with visible indicators and cable access
Small Audio Component Hold a compatible streamer, receiver or compact amplifier
Commercial Media Player Support digital-signage or presentation equipment
Compatibility notice: These are general examples, not guaranteed fits. Check the dimensions, weight, temperature and ventilation requirements of the specific equipment.

5 mm Black Tempered-Glass Shelf

The DVX10 uses a single 5 mm black tempered-glass platform. Its smooth surface creates a coordinated appearance with black televisions, media players, speakers and home theatre accessories.

Clean the shelf using a soft, non-abrasive cloth. Avoid striking the exposed glass edges, placing concentrated impact loads on the surface or overtightening the glass support hardware.

17.8 lb Maximum Equipment Load

The shelf supports equipment weighing up to 8 kg or 17.8 lb when the bracket is assembled correctly and attached to a suitable wall structure.

Position the component near the centre of the glass to distribute the load evenly. Do not use the shelf for oversized equipment that cannot sit securely within the platform.

Load warning: Do not exceed 17.8 lb. Actual installation strength also depends on the wall material, structural support, anchors and mounting method.

Integrated Cable Management

The built-in cable-management section provides a route for organizing HDMI, power, network, optical and audio cables between the component and nearby television or wall connection.

Plan cable routing before permanently mounting the bracket. Keep cables away from sharp edges, avoid tight bends and leave enough slack to disconnect or service the equipment.

Open Access for Controls and Ventilation

The open shelf leaves the front and sides of the component accessible. This makes it easier to use front-panel buttons, load discs, view indicators and operate infrared remote controls.

Follow the equipment manufacturer’s ventilation instructions. Do not block cooling slots, fans or air intakes, and leave enough clearance around heat-producing devices.

Recommended Shelf Placement

LocationInstallation Benefit
Below a Wall-Mounted TV Shorter connection path between the component and display
Beside a Television Keeps equipment reachable without placing it directly below
Office or Boardroom Organizes conferencing and presentation accessories
Retail or Waiting Area Supports media or digital-signage equipment near the screen
Bedroom or Condo Reduces the need for a large entertainment cabinet

Equipment Compatibility Checklist

  • Confirm the equipment weighs no more than 17.8 lb
  • Measure the complete device width and depth
  • Include additional depth required by rear cable connectors
  • Confirm all equipment feet rest securely on the shelf
  • Check that ventilation openings remain unobstructed
  • Keep remote sensors and front-panel controls visible
  • Verify the planned wall location has suitable structural support
  • Confirm nearby access to power and signal connections

Installation Guidelines

Select a mounting position with enough wall space for the shelf, component and connected cables. The wall must be capable of supporting the combined weight of the complete assembly and equipment.

  1. Measure the available wall area and intended equipment
  2. Identify suitable structural support behind the wall surface
  3. Mark the mounting points and keep the bracket properly aligned
  4. Secure the bracket using fasteners suitable for the wall
  5. Attach the shelf support and carefully install the glass
  6. Route the required cables through the management section
  7. Inspect every connection before placing equipment on the shelf
  8. Position the component centrally and confirm stability
Installation safety: Do not depend on unsupported drywall alone. Use suitable structural support and fasteners selected for the wall material. Consult a qualified installer when the construction or load capacity is uncertain.

Technical Specifications

Model / SKU DVX10
Product Type Wall-mounted AV component shelf
Number of Shelves One
Shelf Dimensions 17.5 × 13 in / 450 × 330 mm
Listed Height Approximately 9 in
Shelf Material Tempered glass
Glass Thickness 5 mm / 0.2 in
Maximum Load Capacity 8 kg / 17.8 lb
Cable Management Integrated cable-concealment system
Colour Black
Recommended Use Compatible home and commercial AV equipment

What’s Included

  • 1 × DVX10 glass AV wall-shelf assembly
  • Installation hardware
  • Instruction manual
Hardware notice: Wall construction varies. Inspect the supplied hardware and use suitable structural fasteners for the actual mounting surface. Additional hardware may be required.

Frequently Asked Questions

What are the DVX10 shelf dimensions?

The glass platform measures approximately 17.5 inches wide by 13 inches deep, or 450 × 330 mm.

How much weight can the shelf support?

It supports up to 8 kg or 17.8 lb when correctly installed on a suitable load-bearing wall structure.

Is the shelf made from tempered glass?

Yes. The DVX10 uses a black tempered-glass shelf approximately 5 mm thick.

Can it hold a cable or satellite box?

It can support a compatible receiver that fits securely on the shelf, weighs less than 17.8 lb and has sufficient ventilation.

Can it hold a game console?

A compatible console may be used when its dimensions, orientation, weight and cooling requirements are suitable for the shelf.

Does the shelf help conceal cables?

Yes. Its integrated cable-management system helps guide and organize wires between the component and wall-mounted television.

Will a full-size AV receiver fit?

Some full-size receivers may be too heavy, wide or deep. Measure and weigh the receiver before ordering and allow space for cooling.

Can the DVX10 be attached to drywall alone?

Unsupported drywall alone is not recommended. Secure the bracket using suitable structural support and fasteners selected for the wall material.

Compare AV Component Shelves

Explore compact single shelves and multi-level organizers for installations with two or three AV components.

View All AV Shelves Compact Single Shelf Dual Glass Shelf Three-Tier Shelf TV Wall Mounts Cable Management