TEXONIC DVX701 Floating Glass AV Wall Shelf – 17.6 lb Capacity

Keep media equipment close to your wall-mounted TV without adding a bulky entertainment cabinet. The TEXONIC DVX701 is a single floating AV component shelf designed for streaming boxes, cable receivers, compact game consoles, media players, routers and other compatible electronics.

A 5 mm black tempered-glass shelf supports equipment weighing up to 8 kg / 17.6 lb, while the adjustable wall-mounted design and integrated cable channel help create a cleaner TV and entertainment setup.

DVX701 Quick Overview

A Cleaner Way to Mount AV Components

Wall-mounted televisions often leave cable boxes, streaming players and other electronics with nowhere convenient to sit. The DVX701 creates a dedicated equipment platform directly on the wall, helping free up furniture and floor space.

Its open shelf design keeps displays, remote-control sensors, buttons and cable connections accessible while maintaining a clean appearance around the television.

Why Choose the DVX701?

What Can You Put on the DVX701?

The shelf is designed for compact electronics that fit safely within the shelf surface and remain below the maximum load rating.

Will Your Equipment Fit?

Also allow enough space around the equipment for ventilation, cable connectors and access to controls. Do not place equipment on the shelf if it overhangs unsafely or cannot sit securely on the glass platform.

5 mm Black Tempered-Glass Shelf

The single shelf uses 5 mm / 0.2-inch tempered glass with a black finish that coordinates naturally with most televisions, AV components and entertainment systems.

For routine cleaning, use a soft non-abrasive cloth. Avoid impacts to the glass edges, excessive point loading or overtightening the shelf hardware.

Adjustable Shelf Position

The shelf holder can be positioned vertically along the wall plate, helping installers adjust the shelf location to suit the selected component and available space.

The assembly provides approximately 9.5 inches of component clearance. Always confirm the actual equipment dimensions and leave additional room for ventilation and connected cables.

Built-In Cable Management

The wall-mounted centre section provides a convenient route for connected cables and helps reduce visible wiring around the shelf.

Leave enough cable slack to connect and remove equipment without placing unnecessary tension on device ports.

Installation Guidance

• Confirm the device dimensions and weight before mounting.
• Install the wall bracket on a structure capable of supporting the shelf and equipment.
• Use fasteners suitable for the specific wall construction.
• Keep the wall bracket vertical and the glass shelf level.
• Confirm all shelf supports and glass hardware are properly secured.
• Route cables without sharp bends or excessive tension.
• Check the completed installation before placing valuable AV equipment on the shelf.

Technical Specifications

What's Included

• 1 × TEXONIC DVX701 wall-mount shelf assembly
• 1 × Black 5 mm tempered-glass shelf
• Installation hardware
• Instruction manual

Before You Buy

• Maximum equipment load is 8 kg / 17.6 lb.
• Shelf surface measures approximately 14.2" × 9.8".
• Check equipment width, depth, weight and ventilation requirements before ordering.
• Equipment must sit securely on the glass without unsafe overhang.
• Wall construction and required mounting fasteners vary by installation.
• The shelf is intended for compatible AV/media equipment, not televisions or displays.

TEXONIC Warranty

Need More Shelf Space?

Choose a larger AV shelf system when you need separate levels for multiple media components, or complete the installation with cable-management and connectivity accessories.