Description
Hide visible TV, speaker, computer and AV cables with the TEXONIC C-CML paintable wall cord cover kit.
The kit provides three cuttable 16-inch cable-cover sections for 48 inches of total coverage. Its wide half-round profile creates a clean surface-mounted cable path without cutting open the wall, while the included elbow and end caps provide a more finished appearance.
| Brand / Model | TEXONIC C-CML |
|---|---|
| Total Coverage | 48 in. / 121.9 cm |
| Cover Sections | 3 sections × 16 in. |
| Listed Width | 4.3 in. / 10.9 cm |
| Profile | Half-round surface cable cover |
| Mounting Options | Included adhesive or screws |
| Colour | Paintable white |
Clean Surface Cable Management
The C-CML provides an alternative to leaving wires exposed or opening the wall to create an internal cable route. It covers compatible surface-mounted cables with a smooth half-round channel that can be painted to coordinate with the surrounding wall or ceiling.
This makes it useful for finished rooms, offices, rental-property upgrades, wall-mounted TV installations and areas where concealed in-wall routing is not practical.
Key Features
- Three 16-inch sections provide 48 inches of total coverage
- Wide 4.3-inch listed profile for compatible cable bundles
- Half-round shape provides a softer appearance than square trunking
- Cuttable sections support custom installation lengths
- Paintable white surface can coordinate with room décor
- Included 90° elbow supports one right-angle cable route
- Two end caps provide a cleaner finished appearance
- Adhesive and screw mounting options are included
- Snap-on cover simplifies cable placement and access
- Suitable for compatible wall or ceiling installations
Designed for Short, Wider Cable Routes
Many slim cable raceways are designed for one or two small cables and provide a long total channel length. The TEXONIC kit instead uses three shorter sections with a much wider listed profile.
This configuration is useful for a short drop below a wall-mounted TV, a route between nearby AV components or another compact installation where multiple compatible wires need to follow the same path.
Suitable Cable Applications
| Application | Fit Considerations |
|---|---|
| Wall-Mounted TV | Measure HDMI, power-managed cords and other AV cables before mounting |
| Speaker Wiring | Confirm wire quantity, thickness and required separation |
| Computer Workstation | Check monitor, network, USB and power-cable connector sizes |
| Office or Meeting Room | Plan the route between the display, table and presentation equipment |
| Retail Display | Keep customer-facing wiring organized and protected from casual contact |
| Hotel or Hospitality Room | Create a more finished route for compatible TV and media cables |
Measure the Complete Cable Bundle
- Place all cables together in their intended arrangement
- Measure the widest and deepest part of the bundle
- Include large moulded connectors and adapters
- Allow room for cables to enter and leave the cover smoothly
- Avoid forcing sharp bends into HDMI, network or optical cables
- Confirm the 90° elbow provides enough turning space
- Keep damaged, overheated or unsuitable cords out of the raceway
- Test the cable arrangement before attaching the base to the wall
Adhesive or Screw Installation
| Mounting Method | Planning Considerations |
|---|---|
| Adhesive | Use on a clean, dry, smooth and suitable surface; confirm the final route before pressing it into position |
| Screws | Useful where the surface or installation requires a mechanical attachment; use appropriate wall fastening points |
Cutting and Painting
The three sections can be shortened to suit the installation. Measure the full route, mark each piece carefully and make a clean square cut so adjoining sections and fittings align properly.
The white cover is paintable for a closer match with the wall or ceiling. Clean the surface and use paint suitable for the cable-cover material. Allow the finish to dry fully before assembling or handling the cover.
Installation Checklist
- Measure the cable route and complete cable bundle
- Plan the positions of the straight sections, elbow and end caps
- Confirm that all plugs and connectors will fit through the intended route
- Cut the cover sections to the required length
- Clean and dry the mounting surface
- Attach the base using the included adhesive or suitable screw points
- Place the cables in the channel without sharp bends or tension
- Install the elbow and end caps where required
- Snap the covers into position
- Inspect the complete route before operating connected equipment
Technical Specifications
| Brand | TEXONIC |
|---|---|
| Model / SKU | C-CML |
| Product Type | Surface cable-cover and cord-hider kit |
| Number of Sections | 3 |
| Section Length | 16 in. / 40.6 cm each |
| Total Channel Length | 48 in. / 121.9 cm |
| Listed Cover Width | 4.3 in. / 10.9 cm |
| Internal Depth | Not published—measure cable fit before installation |
| Published Cable Capacity | Not specified |
| Profile Shape | Half-round |
| Installation Surface | Compatible walls or ceilings |
| Mounting Method | Adhesive or screws |
| Finish | Paintable white |
What’s Included
- 3 × 16-inch cable-cover sections
- 1 × 90° corner elbow
- 2 × end caps
- Mounting adhesive
- Mounting screws
Frequently Asked Questions
How much cable-cover length is included?
The kit includes three 16-inch sections, providing 48 inches of total straight-channel coverage.
Can the sections be shortened?
Yes. The sections can be cut to the length required for the installation.
Can the cord cover be painted?
Yes. The white surface is paintable so it can more closely match the surrounding wall or ceiling.
How many cables will fit?
An exact cable capacity is not published. Fit depends on cable diameter, connector size, bend requirements and the unpublished internal channel depth.
Can it turn around a corner?
The kit includes one 90° elbow for a compatible right-angle route.
Does it require drilling?
Adhesive and screws are both included. Select the mounting method suitable for the wall or ceiling surface.
Can it replace electrical conduit?
No conduit or permanent-wiring approval is published. Treat it as a surface cable organizer and follow applicable electrical and cable-installation requirements.
Complete Your AV Installation
Browse compatible cable-management products, display mounts, HDMI cables, speaker wire and AV wall shelves.
Cable Management & Wall Plates TV Wall Mounts HDMI Cables Speaker Cables 3-Tier AV Wall Shelf
