Description
TEXONIC CST86 60W IP55 Wall-Mount Speaker
Black 6.5-inch indoor/outdoor commercial speaker with full-range sound, selectable 70V and 100V transformer taps, and an 8-ohm input for restaurants, retail stores, offices, patios and commercial music systems.
Quick Specifications
| Speaker design | 2-way wall-mount speaker with rear bass radiator |
| Drivers | 6.5-inch woofer and 1-inch tweeter |
| Rated power | 60W |
| Audio systems | 70V, 100V or 8 ohms |
| Weather protection | IP55 |
The TEXONIC CST86 is a black, 60W indoor/outdoor wall-mount speaker designed for commercial background music, foreground audio and general sound reinforcement.
Its 6.5-inch woofer and 1-inch tweeter provide full-range reproduction from 50 Hz to 20 kHz. A rear-mounted bass radiator helps extend low-frequency performance and deliver fuller sound from the compact enclosure.
The built-in transformer supports 70V and 100V distributed audio systems, while the separate 8-ohm setting allows operation with a compatible low-impedance amplifier.
An integrated U-bracket allows horizontal or vertical installation and lets the speaker angle be adjusted toward the required listening area.
| Brand | TEXONIC |
|---|---|
| Model | CST86 |
| Product type | Indoor/outdoor wall-mount speaker |
| Speaker design | 2-way speaker with rear-mounted bass radiator |
| LF driver | 1 × 6.5-inch woofer |
| HF driver | 1 × 1-inch tweeter |
| Rated power | 60W |
| Maximum power | 120W |
| 70V transformer taps | 3.75W, 7.5W, 15W, 30W and 60W |
| 100V transformer taps | 7.5W, 15W, 30W and 60W |
| Low-impedance input | 8 ohms |
| Sensitivity | 98 dB ±3 dB |
| Frequency response | 50 Hz–20 kHz |
| IP rating | IP55 |
| Mounting | Integrated wall-mount U-bracket |
| Orientation | Horizontal or vertical |
| Dimensions | 20.5 H × 28.7 W × 19.9 D cm 8.07 H × 11.30 W × 7.83 D in |
| Net weight | 3.4 kg / 7.5 lb |
| Finish | Black |
| Operating Mode | Available Settings | Typical Use |
|---|---|---|
| 70V | 3.75W, 7.5W, 15W, 30W or 60W | Distributed commercial audio systems |
| 100V | 7.5W, 15W, 30W or 60W | Compatible 100V commercial amplifiers |
| 8 Ohms | Low-impedance mode | Compatible 8-ohm amplifier outputs |
In a 70V or 100V system, add together the selected transformer tap of every speaker connected to the amplifier. Keep the combined speaker load below the amplifier’s rated output.
- Restaurants, cafés and dining rooms
- Retail stores and showrooms
- Offices and reception areas
- Gyms, studios and recreation spaces
- Hotels and hospitality facilities
- Restaurant and café patios
- Covered outdoor seating areas
- Residential patios and decks
- Outdoor amenity areas
- Weather-protected commercial entrances
Indoor and Outdoor Use in Canada
The CST86B is suitable for indoor and outdoor use when installed correctly. Outdoor-rated speaker cable and weather-resistant cable-entry protection should be used where required.
Do not install the speaker where it can be submerged or exposed to standing water. Inspect outdoor installations after severe weather and keep the grille and rear bass radiator clear of debris.
- Clean using a soft, dry or slightly damp cloth.
- Do not use solvents or abrasive cleaners.
- Keep the front grille and rear bass radiator clear.
- Inspect outdoor mounting hardware after severe weather.
- Check outdoor cable entries and connections for moisture protection.
- 1 × TEXONIC CST86B black wall-mount speaker
- 1 × Integrated adjustable U-bracket
- 1 × CST86 Series user manual
Need Help Planning a Commercial Speaker System?
Contact AVTECK for assistance selecting the correct speaker quantity, transformer tap, amplifier power and speaker cable for the TEXONIC CST86B indoor or outdoor audio system.
