Description
Deliver clear background music, paging and voice announcements with a powerful 6-inch commercial wall speaker designed for flexible 70V, 100V and 8-ohm audio systems.
The TEXONIC CS76 is a two-way commercial wall-mount speaker for restaurants, retail stores, offices, schools, hotels, showrooms and other business audio applications. Its built-in transformer supports distributed 70V and 100V speaker systems, while the selectable 8-ohm mode allows connection to a compatible low-impedance amplifier. An adjustable U-shaped bracket makes it suitable for walls, columns, beams and open-ceiling installations.
TEXONIC CS76 Commercial Wall Speaker
The CS76 combines a 6-inch main driver, separate high-frequency driver, built-in commercial audio transformer, ABS enclosure, metal grille and adjustable mounting bracket in one surface-mount loudspeaker.
It is a practical choice when recessed ceiling speakers are not suitable or when each speaker needs to be aimed toward a specific customer, seating, work or listening area.
Brand: TEXONIC
Store model / SKU: CS76
Black model designation: CS76B
Speaker design: 6-inch two-way commercial wall speaker
System compatibility: 70V, 100V or 8Ω
Selling unit: One speaker with adjustable bracket
Two-Way Sound for Music and Paging
A 6-inch driver reproduces lower frequencies, vocals and midrange content. A separate 1.5-inch high-frequency driver adds clarity to speech, instruments and music detail.
This two-way configuration provides fuller sound and clearer voice reproduction than a basic single-cone paging speaker. It is well suited to businesses that use the same speaker system for background music and occasional announcements.
Full-Range Commercial Audio
The CS76 has a published frequency response of 50Hz–20kHz and a sensitivity rating of 94dB at 1W/1m.
Its larger enclosure and 6-inch driver make it suitable for fuller background music and stronger paging than smaller compact wall speakers. A commercial subwoofer may still be preferred where deep, high-impact bass is required.
Wide 120° Coverage
The published 120-degree sound coverage helps distribute music and speech over a broad listening area from each wall or open-ceiling location.
The adjustable bracket lets the installer aim the speaker toward customers, tables, reception desks, hallways, workspaces or seating areas instead of directing sound toward unused walls or reflective surfaces.
Recommended Commercial Applications
| Business Type | Typical Use |
|---|---|
| Restaurant or Café | Dining-room music, sheltered-patio sound and staff paging |
| Retail Store or Showroom | Customer-facing music, promotional messages and announcements |
| Office or Reception Area | Background music, staff paging and presentation audio |
| Hotel or Hospitality Space | Lobby, lounge, corridor, meeting-room and breakfast-area sound |
| School or Training Facility | Classroom audio, recorded programs and voice announcements |
| Clinic, Salon or Spa | Ambient music and clear general paging |
| Warehouse Support Area | Offices, lunchrooms, reception areas and quieter work zones |
| Open-Ceiling Commercial Space | Surface-mounted audio where recessed speakers are impractical |
70V and 100V Distributed Audio
The transformer built into the CS76 allows multiple speakers to connect to a compatible 70V or 100V commercial amplifier.
Constant-voltage systems are commonly used for multi-speaker business audio because they support longer cable runs and make system capacity easy to calculate using each speaker’s selected wattage tap.
Selectable Transformer Taps
| Operating Mode | Available Settings |
|---|---|
| 70V | 2.5W / 5W / 10W / 20W / 40W |
| 100V | 5W / 10W / 20W / 40W |
| Low Impedance | 8Ω mode |
Use only the transformer settings identified for the amplifier’s actual output voltage.
The 2.5W setting is available for 70V operation only. The lowest published tap for a 100V system is 5W.
Choosing the Right Tap Setting
| Tap Range | General Application |
|---|---|
| 2.5W–5W | Quiet offices, hallways and low-level ambient music |
| 10W | General office, retail and hospitality background music |
| 20W | Restaurants, showrooms and moderate background noise |
| 40W | Larger or noisier areas requiring stronger output |
These are general planning examples. Final tap selection depends on the speaker quantity, mounting height, listening distance, room acoustics, background noise and required sound level.
Calculate the Total Speaker Load
Add the selected transformer tap of every speaker connected to the amplifier.
Example: Six speakers set to 10W create a total load of 60W.
6 speakers × 10W = 60W total transformer load
Amplifier Selection Examples
| Speaker Configuration | Total Load | Practical Amplifier Size |
|---|---|---|
| 4 speakers at 10W | 40W | 60W or higher |
| 6 speakers at 10W | 60W | 120W or higher |
| 8 speakers at 10W | 80W | 120W or higher |
| 4 speakers at 20W | 80W | 120W or higher |
| 6 speakers at 20W | 120W | 240W or higher |
| 8 speakers at 20W | 160W | 240W or higher |
| 4 speakers at 40W | 160W | 240W or higher |
Maintain Amplifier Headroom
For practical commercial-audio system planning, keep the combined transformer-tap load at or below approximately 80% of the amplifier’s rated output.
| Amplifier Rating | Recommended Maximum Tap Load |
|---|---|
| 60W | Approximately 48W |
| 120W | Approximately 96W |
| 240W | Approximately 192W |
| 350W | Approximately 280W |
Different Taps in the Same System
Speakers connected to the same 70V or 100V line may use different wattage taps.
A quiet hallway may use a 5W setting while speakers in a busy restaurant or showroom use 20W. Add every selected tap separately when calculating the final amplifier load.
8Ω Low-Impedance Operation
The rear selector includes an 8-ohm position for use with a compatible low-impedance amplifier.
The current product listing publishes a 100W rating for 8Ω operation but does not identify whether this is a continuous or maximum rating. Match the amplifier conservatively and confirm the current product label before applying high power.
One speaker presents an 8-ohm nominal load. Two speakers connected in parallel create a 4-ohm load. Confirm that the amplifier supports the final impedance before connecting multiple speakers.
Never connect the speaker to a 70V or 100V output while its selector is set to 8Ω. Low-impedance and constant-voltage calculations must not be mixed.
Parallel and Daisy-Chain Wiring
In a 70V or 100V system, multiple CS76 speakers connect electrically in parallel. The cable may physically run from the amplifier to the first speaker and continue to the remaining speakers.
- Connect every speaker to the same 70V or 100V output.
- Keep positive and common polarity consistent throughout the run.
- Select the correct transformer tap on every speaker.
- Add all selected tap values when calculating the amplifier load.
- Use speaker cable approved for the building and installation area.
- Switch off the amplifier before wiring or changing tap settings.
Important Connection Warning
Select the correct 70V, 100V or 8Ω mode before operating the system.
Do not use a 70V-only tap setting with a 100V amplifier output.
Do not connect a speaker set to 8Ω to a 70V or 100V output.
Do not connect different amplifier output types to the same speaker line.
Power down and disconnect the amplifier before wiring speakers or changing the rear selector.
Horizontal or Vertical Installation
The included U-shaped bracket allows the speaker to be mounted horizontally or vertically on a suitable wall, column, beam or open-ceiling structure.
After mounting, loosen the side knobs, rotate the speaker toward the required listening area and tighten the knobs securely.
Indoor and Sheltered Outdoor Use
The CS76 may be used indoors or in a protected covered-outdoor area, such as a roofed patio, sheltered entrance or covered service space.
A published IP weather rating is not listed. Do not install the speaker where it will be directly exposed to rain, snow, water spray, standing moisture or severe weather.
Durable Commercial Construction
- Durable black ABS speaker enclosure
- Protective metal front grille
- Adjustable U-shaped mounting bracket
- Rear 70V, 100V and 8Ω selector
- Gold-plated screw and banana-plug terminals
- Horizontal or vertical installation
Installation Planning
- Confirm that the mounting surface can support the speaker and bracket.
- Use screws, bolts or anchors rated for the mounting surface.
- Check for wiring, plumbing and HVAC components before drilling.
- Aim the speaker toward occupied areas rather than reflective surfaces.
- Distribute multiple speakers evenly throughout the listening area.
- Follow applicable building, electrical and installation requirements.
Surface-specific screws, bolts and structural anchors are not included. Select suitable mounting hardware for the wall or structural material.
Technical Specifications
| Brand | TEXONIC |
| Store SKU | CS76 |
| Black Model | CS76B |
| Product Type | Two-way commercial wall and surface-mount speaker |
| Main Driver | 6-inch driver |
| High-Frequency Driver | 1.5-inch high-frequency unit |
| Speaker-Line Compatibility | 70V / 100V distributed audio |
| 70V Transformer Taps | 2.5W / 5W / 10W / 20W / 40W |
| 100V Transformer Taps | 5W / 10W / 20W / 40W |
| Transformer Impedance | 2kΩ / 1kΩ / 500Ω / 250Ω / 122Ω |
| Low-Impedance Mode | 8Ω |
| Published 8Ω Power Rating | 100W; continuous or maximum classification not stated |
| Frequency Response | 50Hz–20kHz at -10dB |
| Sensitivity | 94dB at 1W / 1m |
| Published Coverage | 120° |
| Enclosure | ABS cabinet |
| Grille | Metal grille |
| Connections | Gold-plated screw and banana-plug terminals |
| Mounting Bracket | Adjustable U-shaped bracket |
| Mounting Orientation | Horizontal or vertical |
| Dimensions | 29.8 × 21.5 × 22.5cm |
| Weight | Approximately 3.7kg / 8.2 lb |
| Colour | Black |
| Recommended Environment | Indoor or protected covered-outdoor installation |
| Recommended Use | Commercial background music, paging and announcements |
What’s Included
- 1 × TEXONIC CS76 commercial wall speaker
- 1 × Adjustable U-shaped mounting bracket
- CS76 instruction-manual access
Warranty
TEXONIC manufacturer warranty coverage is subject to the current written warranty terms, product registration requirements where applicable and proof of purchase. Confirm the current warranty period on the order documentation.
Frequently Asked Questions
Is the CS76 sold individually or as a pair?
It is sold individually. Each product unit includes one speaker and one adjustable mounting bracket.
Can the CS76 connect to a 70V amplifier?
Yes. The available 70V taps are 2.5W, 5W, 10W, 20W and 40W.
Can it connect to a 100V amplifier?
Yes. The available 100V taps are 5W, 10W, 20W and 40W.
Can it connect to an 8-ohm amplifier?
Yes. Set the rear selector to 8Ω and confirm that the total connected speaker impedance is compatible with the amplifier.
How many CS76 speakers can connect to one amplifier?
The quantity depends on the amplifier rating and selected transformer taps. Add the tap of every speaker and keep practical amplifier headroom.
Is the CS76 suitable for both music and paging?
Yes. Its two-way driver design is suitable for background music, voice announcements and general commercial paging.
Can the speaker be mounted horizontally?
Yes. The included bracket supports horizontal or vertical mounting and allows the listening angle to be adjusted.
Is the CS76 fully weatherproof?
A published IP weather rating is not listed. Install it indoors or in a protected covered-outdoor location sheltered from direct rain, snow and water exposure.
Are wall screws and anchors included?
No. Choose screws, bolts or anchors suitable for the mounting surface and the speaker’s installed weight.
Need Help Planning the Speaker System?
Send AVTECK the room dimensions, mounting height, speaker quantity, amplifier model and required music or paging level. We can help calculate the transformer load and recommend practical speaker placement for your Canadian commercial audio project.
