Description
Two-Zone Audio System for Canadian Homes and Small Businesses
QX200 Whole-Home Wi-Fi Audio System with 4 In-Ceiling Speakers
Enjoy clean, built-in music in two rooms or listening areas with this complete TEXONIC audio package. It includes one QX200 dual-zone Wi-Fi and Bluetooth amplifier and four CM610 6.5-inch in-ceiling speakers.
Install two speakers in Zone 1 and two speakers in Zone 2. Both zones play the same selected music source, while separate volume controls let you set a comfortable sound level for each area.
System layout: 2 stereo zones with 2 speakers per zone
Zone operation: Same source with separate volume control
Music options: Wi-Fi, Bluetooth, USB MP3 and AUX input
Recommended area: Approximately 800–1,200 sq. ft.
Residential and Small Commercial Applications
This four-speaker system is suitable for background music in homes and relatively quiet small commercial spaces of approximately 800–1,200 sq. ft.
- Living room and kitchen
- Kitchen and dining room
- Main floor and home office
- Family room and basement
- Condominiums and townhomes
- Small retail stores and boutiques
- Professional offices and boardrooms
- Clinics, reception areas and waiting rooms
- Salons, studios and small showrooms
Actual coverage depends on ceiling height, room layout, speaker placement, ambient noise and preferred volume. The stated area is AVTECK application guidance and is not a fixed coverage guarantee.
Same Music with Separate Zone Volume
Zone 1: One left and one right CM610 ceiling speaker
Zone 2: One left and one right CM610 ceiling speaker
One selected source plays throughout the system, but Zone 1 and Zone 2 can operate at different volume levels.
- Keep one consistent playlist throughout the property.
- Use a higher volume in a larger or busier area.
- Keep a lower level in an office, dining room or quiet area.
- Reduce an unused zone without changing the other zone.
- Simplify daily operation by managing one music source.
Important: This is a shared-source system. It does not play two different songs independently at the same time.
Built-In and External Audio Sources
Play music using the QX200’s built-in playback options or connect your own compatible audio source.
- Wi-Fi network music streaming
- Bluetooth from a compatible smart device
- USB MP3 music playback
- 4Stream app control
- RJ45 Ethernet network connection
The rear AUX input can accept a compatible line-level source such as:
- Desktop or laptop computer audio output
- Smartphone or tablet audio output
- Television analogue audio output
- CD player, tuner or media player
- External Wi-Fi audio streamer
A suitable RCA, 3.5mm, USB-C or device-specific audio adapter may be required.
Expandable for More Speakers or Deeper Bass
The QX200 provides separate line-level outputs for Zone 1 and Zone 2. These outputs can send the selected audio to compatible external equipment without replacing the original system.
Add an External Power Amplifier
Connect a zone line output to a compatible power amplifier when more speaker capacity is required. The external amplifier powers the added speakers, while the QX200 remains the primary music source and zone controller.
Suggested power-amplifier option:
The MC2120 uses balanced line inputs and supports 8-ohm or 70V speaker operation. The correct interface cable, speaker type and wiring mode must be confirmed before connection.
Add More Matching Ceiling Speakers
Additional CM610 speakers can be used with a suitable external power amplifier or with another approved system layout. Do not add speakers to the QX200 outputs without confirming the final channel impedance.
Add a Powered Subwoofer
A compatible powered subwoofer can be connected through a suitable zone line output to add deeper bass for music, television or entertainment areas. The subwoofer must have its own amplifier and suitable input, level and crossover controls.
Confirm the required subwoofer connection and cable before ordering. Expansion products are optional and are not included in the standard package.
Optional Installation and Streaming Products
Complete or expand the installation with compatible AVTECK products.
Easy Installation
- Select two speaker positions in Zone 1 and two in Zone 2.
- Check each ceiling location for joists, pipes, wiring and ductwork.
- Run one properly rated speaker cable from each QX200 speaker output to its assigned CM610 speaker.
- Cut the four ceiling openings using the supplied templates.
- Connect and secure each speaker using the tool-free locking system.
- Connect the Wi-Fi and Bluetooth antennas, network and preferred audio source.
- Begin at a low volume and test both zones before final adjustment.
Use FT4-rated in-wall speaker cable when required for concealed installations in Canada. Disconnect AC power before making speaker or expansion connections.
System Specifications
| Package SKU | TXPC04-12 |
|---|---|
| System Type | Two-zone shared-source ceiling-speaker audio system |
| Recommended Area | Approximately 800–1,200 sq. ft. |
| Amplifier Model | TEXONIC QX200 |
| Amplifier Zones | 2 stereo zones with separate volume control |
| Amplifier Channels | 4 |
| Output at 8 Ohms | 4 × 30W |
| Output at 4 Ohms | 4 × 60W |
| Minimum Speaker Load | 4 ohms per channel |
| Zone Operation | Same source with separate Zone 1 and Zone 2 volume |
| Audio Sources | Wi-Fi, Bluetooth, USB MP3 and AUX input |
| Network Connection | Wi-Fi or RJ45 Ethernet |
| App Control | 4Stream app on compatible devices |
| External Audio Input | AUX line-level input |
| Expansion Outputs | Separate Zone 1 and Zone 2 line outputs |
| Amplifier Frequency Response | 20Hz–20kHz |
| Amplifier Signal-to-Noise Ratio | 94dB |
| Amplifier Dimensions | 28 × 20 × 4.4cm |
| Speaker Model | TEXONIC CM610 |
| Speaker Quantity | 4 |
| Speaker Type | 6.5-inch two-way in-ceiling speaker |
| Speaker Impedance | 8 ohms each |
| Speaker Maximum Power | 80W each |
| Speaker Frequency Response | 70Hz–20kHz |
| Speaker Sensitivity | 87dB |
| Speaker Grille | Slim magnetic paintable grille |
| Speaker Installation | Tool-free auto-locking mounting system |
| Ceiling Cutout | 8.25 inches per speaker |
| Mounting Depth | Approximately 4 inches per speaker |
What’s Included
- 1 × TEXONIC QX200 amplifier
- 4 × TEXONIC CM610 in-ceiling speakers
- 1 × QX200 remote control
Warranty
QX200 amplifier: 2-year limited manufacturer’s warranty
CM610 in-ceiling speakers: 3-year limited manufacturer’s warranty
Need Help Planning or Expanding the System?
Send AVTECK your room dimensions, ceiling height, speaker positions and future expansion plans. We can help confirm the original layout, power-amplifier connection, subwoofer option and required FT4 cable.
