Description
Create smooth background music and clear paging coverage across a commercial space with ten matching slim ceiling speakers.
This TEXONIC AF106T commercial ceiling speaker package includes ten slim, two-way 70V/100V speakers for offices, restaurants, cafés, retail stores, clinics, salons, reception areas and other business interiors. The low-profile design provides a clean ceiling appearance while the separate tweeter supports clearer music and voice reproduction.
Ten-Speaker Commercial Ceiling Package
The package provides ten matching AF106T speakers for projects that need consistent sound and appearance throughout one larger area or several connected rooms.
Speaker quantity: 10
Speaker model: TEXONIC AF106T
System compatibility: 70V or 100V commercial audio
Package type: Speaker-only commercial audio bundle
Designed for Even Sound Distribution
Using several properly spaced ceiling speakers normally provides more balanced coverage than using a small number of speakers at high volume.
Ten speakers can be distributed throughout the listening area so music and announcements remain easier to hear without creating one excessively loud section near a single speaker.
Recommended Commercial Applications
| Business Type | Typical Use |
|---|---|
| Restaurant or Café | Dining-room music and staff announcements |
| Retail Store | Music across sales, display and checkout areas |
| Office | Reception, workspace, hallway and staff-room audio |
| Medical Clinic | Waiting-room music and general paging |
| Salon or Spa | Comfortable low-level music throughout service areas |
| School or Training Centre | Classroom, hallway and common-area announcements |
| Hotel or Hospitality Space | Lobby, corridor and meeting-area audio |
Slim Trimless-Style Ceiling Appearance
The AF106T has a narrow visible edge that helps each speaker blend into a finished ceiling without the wide flange commonly found on traditional commercial paging speakers.
Using ten matching speakers creates a consistent appearance throughout the complete installation, including customer-facing areas where the ceiling system should remain visually discreet.
Two-Way Sound for Music and Paging
Each AF106T uses a main speaker driver for lower and middle frequencies together with a separate 1-inch tweeter for higher-frequency detail.
This two-way construction supports clearer voice announcements and more balanced background music than a basic single-cone paging speaker.
70V and 100V Commercial Audio Compatibility
The built-in transformer allows all ten speakers to operate from a properly selected 70V or 100V commercial amplifier.
Constant-voltage audio systems are commonly used when one amplifier must power several speakers across a business. The speakers connect electrically in parallel, and the selected wattage tap of every speaker is added together to calculate the total amplifier load.
AF106T Transformer Taps
| System Voltage | White Wire | Red Wire | Common |
|---|---|---|---|
| 70V | 2.5W | 5W | Black wire |
| 100V | 5W | 10W | Black wire |
Total Load for Ten Speakers
Multiply the selected tap of one AF106T by ten to calculate the complete speaker-package load.
| System | Tap Per Speaker | Quantity | Total Load |
|---|---|---|---|
| 70V | 2.5W | 10 | 25W |
| 70V | 5W | 10 | 50W |
| 100V | 5W | 10 | 50W |
| 100V | 10W | 10 | 100W |
Recommended Amplifier Capacity
For reliable commercial operation, keep approximately 20% of the amplifier’s rated output available as operating headroom.
| Speaker Load | Typical Use | Recommended Amplifier |
|---|---|---|
| 25W | Ten speakers at 2.5W on 70V | 60W or higher |
| 50W | Ten speakers at 5W | 120W or higher |
| 100W | Ten speakers at 10W on 100V | At least 125W; select the next suitable standard amplifier size |
A 60W amplifier is suitable for the 25W configuration but does not provide the recommended headroom for a 50W speaker load.
Select the amplifier according to the actual speaker taps—not only the number of speakers.
Flexible Volume by Speaker Area
All ten speakers do not need to use the same transformer tap. A lower tap may be used in a quiet office while a higher tap is used in a reception area or customer space.
When mixed tap settings are used, add each selected wattage separately to calculate the final load.
| Mixed 70V Example | Calculation | Total |
|---|---|---|
| 6 speakers at 2.5W | 6 × 2.5W | 15W |
| 4 speakers at 5W | 4 × 5W | 20W |
| Combined Load | 15W + 20W | 35W |
Parallel Speaker Wiring
The ten speakers connect electrically in parallel. The cable may run from the amplifier to the first speaker and continue to the remaining speakers as a daisy-chain, provided every speaker remains connected across the same 70V or 100V line and common conductors.
- Connect amplifier COM to each speaker’s black wire.
- Use the white wire for the lower transformer tap.
- Use the red wire for the higher transformer tap.
- Use only one positive tap wire on each speaker.
- Insulate every unused tap wire separately.
- Keep wiring polarity consistent throughout the installation.
Important Connection Warning
Connect the package only to a compatible 70V or 100V commercial amplifier output.
Do not connect the AF106T speakers directly to a conventional 4-ohm or 8-ohm amplifier output.
Do not mix 70V and 100V amplifier outputs on the same speaker line.
Switch off and disconnect the amplifier before installing the speakers or changing any tap connection.
Compact Ceiling Installation
Each AF106T requires an approximately 170mm circular ceiling opening and about 3 inches of available mounting depth.
Two spring-loaded snap clamps secure each speaker against the rear of the ceiling material. Inspect the area for electrical wiring, plumbing, ductwork, framing and sprinkler lines before preparing any opening.
Planning the Ten-Speaker Layout
Final speaker spacing depends on ceiling height, room shape, background noise, furniture, wall placement and the required listening level.
- Distribute speakers evenly through the main listening area.
- Avoid placing every speaker close to one wall or entrance.
- Allow for partitions, shelves and fixtures that may block sound.
- Use closer spacing in louder or divided commercial spaces.
- Keep speaker positions clear of strong HVAC airflow where possible.
- Confirm the ceiling structure can safely support each speaker.
A reflected ceiling plan is recommended before cutting all ten openings, especially when lighting, sprinklers and HVAC equipment must also be considered.
Technical Specifications
| Brand | TEXONIC |
| Package SKU | AF106T-10 |
| Speaker Model | AF106T |
| Package Quantity | 10 speakers |
| Speaker Type | Two-way slim commercial ceiling speaker |
| Nominal Size | 6-inch class |
| Tweeter | 1 inch |
| Speaker-Line Input | 70V or 100V constant voltage |
| 70V Power Taps | 2.5W / 5W per speaker |
| 100V Power Taps | 5W / 10W per speaker |
| Wiring | Black COM, white lower tap, red higher tap |
| Ceiling Cutout | 170mm / 6.69 in per speaker |
| Approximate Speaker Size | 7.4 in diameter × 3 in depth |
| Mounting System | Two spring-loaded snap clamps per speaker |
| Finish | White steel cover and grille |
| Recommended Use | Commercial background music, paging and announcements |
What’s Included
- 10 × TEXONIC AF106T ceiling speakers
- 10 × Ceiling cutout templates
- Speaker wire connectors
- AF106T installation manual access
Package Scope
This is a ten-speaker package. Select the commercial amplifier, speaker cable and paging or music source according to the final installation requirements.
Warranty
TEXONIC AF106T Ceiling Speakers: 3-Year Manufacturer’s Warranty
Frequently Asked Questions
Does this package include an amplifier?
No. This package contains ten AF106T ceiling speakers. The amplifier must be selected according to the chosen 70V or 100V taps and total speaker load.
Can all ten speakers connect to one amplifier?
Yes. All ten speakers can operate from one compatible commercial amplifier when the selected tap wattage remains within the amplifier’s safe capacity.
What size amplifier is needed at the 5W tap?
Ten speakers at 5W create a 50W load. A 120W commercial amplifier provides suitable operating headroom for this configuration.
Can the speakers use different tap settings?
Yes. Lower taps may be used in quieter areas and higher taps in rooms needing more output. Add every selected tap when calculating the complete load.
Can these speakers connect to a standard home amplifier?
No. The AF106T is designed for compatible 70V or 100V commercial amplifier outputs and should not be connected directly to a conventional 4-ohm or 8-ohm output.
Is the package suitable for music and paging?
Yes. The two-way speaker design supports background music, staff paging, customer announcements and general business audio.
Need Help Selecting the Amplifier?
Send us the room dimensions, ceiling height, speaker layout, selected tap setting and music or paging requirements. AVTECK can help calculate the final load and recommend a suitable commercial amplifier.
