Description
The TEXONIC VX5 is a low-profile universal projector ceiling mount designed for permanent projector installations where a short, clean ceiling drop is preferred. It supports compatible projectors weighing up to 30 lb / 13.6 kg and provides adjustable positioning to help align the projected image with the screen.
Four adjustable mounting arms accommodate many common projector mounting patterns, while 360° rotation, tilt and swivel adjustment allow the installer to fine-tune projector positioning. The compact approximately 5.9-inch ceiling drop makes the VX5 a practical choice for home theatres, classrooms, offices, boardrooms and presentation spaces.
VX5 Quick Overview
30 lb / 13.6 kg
Approx. 5.9"
360°
Approx. 2"–12.5"
Low-Profile Projector Installation
The VX5 positions a compatible projector approximately 5.9 inches below the mounting surface. This short fixed drop keeps the projector close to the ceiling and helps create a cleaner finished installation where a long extension pole is not required.
It is particularly useful in rooms with standard ceiling heights where the projector can already achieve the required screen position without being lowered significantly.
Fine-Tune Projector Alignment
For the best image quality, physically position the projector as squarely as possible with the screen before relying on the projector's digital keystone correction.
Four Adjustable Projector Mounting Arms
The VX5 uses four adjustable support arms that can be repositioned to line up with compatible threaded mounting points on the bottom of the projector.
The published projector mounting-hole range is approximately 2 to 12.5 inches. Because projector mounting patterns vary, compatibility should always be confirmed before ordering.
Will the VX5 Fit Your Projector?
A universal projector mount can fit many projector models, but it does not fit every projector. Check these points before installation:
- Projector weight does not exceed 30 lb / 13.6 kg
- Mounting-hole pattern falls within the approximately 2"–12.5" supported range
- Projector has suitable threaded mounting points
- Mounting arms do not block cooling vents, filters or service covers
- Correct projector screw diameter, thread and length are available
- Projector can remain balanced beneath the mount
Quick-Release Design for Easier Service
The quick-release connector allows the projector mounting assembly to be separated from the ceiling section. This can make projector installation and future maintenance easier.
The projector can be removed when access is required for cleaning, filter service or other maintenance without completely dismantling the ceiling mount.
Recommended Applications
VX5 or Height-Adjustable Projector Mount?
| Installation | Recommended Mount Style |
|---|---|
| Standard ceiling and projector can remain close to ceiling | VX5 Low-Profile Mount |
| Higher ceiling or projector needs to be lowered | Height-adjustable mount such as VX9 |
| Clean, compact permanent installation | VX5 Low-Profile Mount |
Plan the Projector Position Before Installation
The mount controls projector position, but the correct installation location also depends on the projector and screen. Before drilling the ceiling, confirm:
- Projector throw distance
- Screen size and screen position
- Projector lens location
- Required image height
- Ceiling structure
- HDMI and power cable routing
- Access for projector ventilation and maintenance
Ceiling Installation
The ceiling plate must be attached to a suitable load-bearing structure capable of safely supporting the combined projector and mount weight.
Technical Specifications
| Brand | TEXONIC |
| Model | VX5 |
| BigCommerce SKU | T-VX5 |
| Product Type | Low-profile universal projector ceiling mount |
| Maximum Load | 30 lb / 13.6 kg |
| Projector Mounting Range | Approximately 2"–12.5" |
| Ceiling Drop | Approximately 5.9" |
| Rotation | 360° |
| Tilt Adjustment | Up to approximately 15° |
| Swivel Adjustment | Up to approximately 15° |
| Mounting Arms | 4 adjustable projector support arms |
| Release System | Quick-release connector |
| Installation Aid | Built-in installation level |
| Colour Options | Black / White |
What's Included
- 1 × TEXONIC VX5 projector ceiling mount
- 4 × Adjustable projector mounting arms
- Installation hardware kit
- Instruction manual
VX5 Projector Mount FAQ
Will the VX5 fit every projector?
No. Confirm the projector weight, threaded mounting-hole locations and mounting pattern before ordering.
How far does the projector hang below the ceiling?
The VX5 has a fixed low-profile drop of approximately 5.9 inches.
Can I adjust the height?
No. The VX5 uses a fixed low-profile design. Choose a height-adjustable mount when the projector needs to hang farther below the ceiling.
Can the projector be rotated?
Yes. The mount provides 360° rotation for projector alignment.
Is it suitable for classrooms and offices?
Yes. The low-profile design is suitable for compatible projector installations in classrooms, offices, boardrooms, meeting rooms and other presentation spaces.
Complete Your Projector Installation
Complete the setup with a projector, projection screen, HDMI cable or an adjustable ceiling mount when a longer drop is required.
