Description
Install compatible surround or satellite speakers on a wall or ceiling and direct them toward the listening area with the TEXONIC SK7 adjustable speaker mount pair.
Each compact bracket supports a speaker weighing up to 3.5 kg or 7.7 lb. Multiple adjustment joints provide up to ±90° of tilt and 360° rotation, making the SK7 suitable for rear surround speakers, side speakers, compact home theatre speakers and other compatible small speaker cabinets.
| Package Quantity | Two mounts / one pair |
|---|---|
| Maximum Speaker Weight | 3.5 kg / 7.7 lb per mount |
| Tilt Adjustment | −90° to +90° |
| Rotation | 360° at three adjustable joints |
| Maximum Extension | Approximately 142 mm / 5.6 in |
| Installation | Wall or ceiling |
| Speaker Connection | Compatible threaded or keyhole mounting point |
Flexible Speaker Placement for Surround Sound Systems
The TEXONIC SK7 helps position compatible speakers where they can provide more effective coverage without using floor stands, furniture or fixed shelves.
The brackets can be installed on a suitable wall or ceiling surface. Their three adjustable joints allow the speakers to be aimed toward a sofa, seating area, workstation or other preferred listening position.
Product Features
- Includes two brackets for a matched speaker pair
- Suitable for compatible wall or ceiling installations
- Supports speakers weighing up to 3.5 kg or 7.7 lb each
- ±90° tilt provides a wide vertical adjustment range
- 360° rotation supports flexible speaker orientation
- Three adjustable joints provide detailed positioning control
- Extends approximately 142 mm from the mounting surface
- Compatible with several common satellite-speaker mounting styles
- Compact design reduces the need for speaker stands or shelves
- Installation hardware and instruction manual are included
Wall or Ceiling Installation
Wall installation is useful when surround speakers can be positioned beside or behind the listening area. Ceiling installation may be more practical when furniture, doorways or an open room layout prevent suitable wall placement.
| Installation Type | Planning Considerations |
|---|---|
| Wall Mounting | Select a height and side-to-side location that allows the speaker to aim toward the listening area |
| Ceiling Mounting | Confirm the speaker and its mounting insert are approved to hang securely in the selected orientation |
±90° Tilt and 360° Rotation
The SK7 provides a broad adjustment range for directing a compatible speaker after the mounting plate has been secured.
- Angle a wall-mounted speaker downward from a higher position
- Direct a ceiling-mounted speaker toward the seating area
- Rotate the speaker to suit the room and cabinet orientation
- Adjust the three joints to refine the final speaker direction
- Tighten all adjustment points after positioning is complete
The final adjustment range may be affected by the speaker cabinet, mounting-point position, nearby walls, ceiling clearance and connected speaker wire.
Approximately 142 mm of Mounting Extension
When fully extended, the bracket places the speaker connection approximately 142 mm or 5.6 inches from the wall or ceiling surface.
This extension provides room for the multi-joint adjustment system and can make it easier to position the speaker away from a nearby corner, ceiling edge or wall obstruction.
Compatible Speaker Mounting Connections
The speaker must include a suitable mounting point on the rear or bottom of its cabinet. Speaker size alone does not confirm that the SK7 will fit.
| Connection Type | What to Confirm |
|---|---|
| Single Threaded Insert | Confirm the exact screw diameter, thread pitch and approved mounting capacity |
| Two Threaded Inserts | Confirm the hole spacing is compatible; the matching design supports approximately 52.5–67.5 mm spacing |
| Keyhole Mount | Confirm the keyhole slot is strong enough and shaped for the supplied speaker attachment hardware |
Is the SK7 the Correct Mounting Style?
| Bracket Style | How the Speaker Is Supported |
|---|---|
| TEXONIC SK7 | Connects directly to a compatible threaded insert or keyhole point on a small speaker |
| Side-Clamping Mount | Uses adjustable side arms to grip a larger speaker cabinet |
| Speaker Platform | Supports a speaker from underneath without using a cabinet mounting insert |
Speakers without a threaded insert or keyhole connection normally require a side-clamping bracket or support platform instead of the SK7.
Recommended Applications
| Application | Typical Placement |
|---|---|
| Home Theatre Surround Sound | Side or rear speakers directed toward the seating area |
| Satellite Speaker System | Compact speakers mounted around a television or media room |
| Gaming Room | Rear or side effects speakers installed away from furniture |
| Office or Meeting Room | Compatible compact speakers used for presentations or media |
| Retail or Hospitality Area | Lightweight speakers aimed toward customer or seating areas |
Speaker Compatibility Checklist
- Confirm each speaker weighs no more than 3.5 kg or 7.7 lb
- Locate the threaded insert or keyhole mounting point
- Confirm the exact thread diameter and pitch
- Measure the spacing when the speaker uses two threaded inserts
- Confirm the speaker mounting point supports wall or ceiling use
- Check that the bracket does not block speaker terminals
- Allow room for speaker wire and connectors
- Confirm the cabinet will clear the wall or ceiling when adjusted
- Verify the mounting surface can support the speaker and bracket
Plan Speaker-Wire Routing in Advance
The SK7 does not include an enclosed cable-management channel. Plan the speaker-wire path before installing the wall or ceiling plates.
Leave enough cable length for the speaker to move through its required adjustment range. The wire should not pull against the terminals when the bracket is tilted or rotated.
Installation Guidelines
Install each SK7 bracket on a structural wall or ceiling surface capable of safely supporting the combined weight of the mount and speaker.
- Confirm speaker weight and mounting-point compatibility
- Select the intended wall or ceiling positions
- Plan the speaker-wire route
- Locate suitable structural support
- Secure the mounting plate with appropriate fasteners
- Attach the correct fitting to the speaker cabinet
- Connect the speaker to the adjustable bracket
- Aim the speaker toward the listening area
- Tighten all adjustment joints and mounting screws
- Check both speakers for secure support before regular use
Technical Specifications
| Brand | TEXONIC |
|---|---|
| Model / SKU | SK7 |
| Product Type | Adjustable wall and ceiling speaker mount pair |
| Packaged Quantity | Two mounts / one pair |
| Maximum Load Capacity | 3.5 kg / 7.7 lb per mount |
| Material | Nylon |
| Mount Dimensions | Approximately 142 × 86 × 45 mm 5.6 × 3.4 × 1.8 in |
| Tilt Range | −90° to +90° |
| Rotation | 360° at three adjustable joints |
| Maximum Profile | Approximately 142 mm / 5.6 in |
| Installation Position | Wall or ceiling |
| Speaker Hole Pattern | Compatible single-hole, double-hole or keyhole mounting |
| Dual-Insert Spacing | Approximately 52.5–67.5 mm |
| Cable Management | No enclosed cable-management channel |
| Recommended Speakers | Compatible satellite, surround and compact home theatre speakers |
What’s Included
- 2 × TEXONIC SK7 adjustable speaker mounts
- Installation hardware
- Instruction manual
Frequently Asked Questions
Does the package include two speaker mounts?
Yes. One box includes two SK7 brackets for mounting a pair of compatible speakers.
How much weight can each bracket support?
Each SK7 mount supports a compatible speaker weighing up to 3.5 kg or 7.7 lb.
Can the SK7 be installed on a wall or ceiling?
Yes. The brackets are designed for compatible wall and ceiling installations on a suitable structural mounting surface.
Will the SK7 fit every surround speaker?
No. The speaker must have a compatible threaded insert or keyhole mounting point and remain below the 7.7 lb weight limit.
Does the bracket clamp around the speaker?
No. The SK7 connects directly to a suitable mounting point on the speaker cabinet. It is not a side-clamping bracket.
How far does the mount extend?
The fully extended bracket places the speaker connection approximately 142 mm or 5.6 inches from the mounting surface.
What adjustment does the SK7 provide?
The bracket provides up to ±90° of tilt and 360° rotation through three adjustable joints.
Does the bracket hide speaker wire?
No enclosed cable-management channel is built into the SK7. Plan the speaker-wire route separately before installation.
Can the mount be attached to a suspended ceiling tile?
No. The bracket must be attached to suitable structural support above or behind the finished ceiling surface.
Complete Your Speaker Installation
Compare speaker brackets and find speaker cable, home speakers and commercial audio products for compatible installations.
Speaker Stands & Mounts View SK8 Speaker Mount Speaker Cables Home Speakers Commercial Speakers
SPECIFICATIONS
- Tilt -90°~+90°
- Rotate 360°
- Weight capacity 7.7lb (3.5kg)
FEATURES
- Allow wall and ceiling installation
- Features 90° tilting and 360° rotation
- Installation is as easy as 1-2-3
INCLUDED
- 1 box = 1 pair
- Instruction Manual
- Installation hardware
