Description
Organize compact non-rackmount equipment with the SR2350 1U fixed vented rack shelf.
Made from 1.2 mm cold-rolled steel, this 350 mm-deep shelf fits compatible standard 19-inch racks and cabinets. Its vented surface supports airflow around routers, modems, media players, network devices and other suitable AV or IT equipment.
| Model / SKU | SR2350 |
|---|---|
| Rack Height | 1U |
| Dimensions | 470 × 350 × 45 mm / 18.5 × 13.7 × 1.7 in |
| Material | 1.2 mm cold-rolled steel |
| Shelf Type | Fixed and vented |
| Finish | Black powder coat |
1U Shelf for Non-Rackmount Equipment
The SR2350 adds a stable fixed platform inside a compatible equipment rack for devices that do not include their own rack ears.
Using a rack shelf keeps small components organized with the installed system instead of leaving them loose on top of amplifiers, switches or other equipment.
Key Features
- Uses only 1U of vertical rack space
- 350 mm depth suits many compact and medium-depth devices
- Vented surface supports airflow around installed equipment
- 1.2 mm cold-rolled steel construction
- Fixed design keeps equipment in a consistent position
- Black powder-coated finish matches most rack equipment
- Fits compatible standard 19-inch racks and cabinets
- Suitable for network, AV, security and control installations
Why Choose a 350 mm-Deep Shelf?
The 350 mm/13.7-inch depth provides more support area than a compact 270 mm shelf while requiring less cabinet depth than a 420 mm model.
This middle-depth format is useful for devices that need additional rear support but do not require a full-depth server shelf.
Vented Design for Better Air Movement
Ventilation openings allow air to move around suitable equipment instead of trapping heat against a completely solid platform.
Keep device fans, air intakes and exhaust openings clear. The shelf ventilation does not replace the cooling clearance required by the equipment manufacturer.
Suitable Equipment Examples
| Equipment | What to Check |
|---|---|
| Router or Modem | Depth, antennas, ventilation and cable clearance |
| Network Device | Port access, equipment feet and airflow |
| Media Player | HDMI, network, power and remote-control access |
| Compact AV Component | Device dimensions, weight and cooling requirements |
| Security Equipment | Front controls, rear connections and heat output |
| Control Device | Stable placement and access to required wiring |
Equipment Fit Checklist
- Confirm the rack uses compatible 19-inch rails
- Reserve one available rack unit
- Measure equipment width, depth and height
- Include rear connector and cable clearance
- Confirm equipment weight before loading the shelf
- Keep all device feet securely supported
- Keep ventilation openings unobstructed
- Check front and rear rack-door clearance
- Confirm the shelf fasteners and rack rails are secure
Compare Available Shelf Depths
| Model | Depth | Typical Selection |
|---|---|---|
| SR2270 | 270 mm | Compact equipment and shallow cabinets |
| SR2350 | 350 mm | Medium-depth network and AV equipment |
| SR2420 | 420 mm | Deeper devices and larger rack cabinets |
Fixed Shelf or Sliding Shelf?
| Shelf Type | Best Application |
|---|---|
| SR2350 Fixed Shelf | Equipment that normally remains stationary |
| Sliding Shelf | Keyboards or equipment requiring frequent pull-out access |
| Rack Drawer | Enclosed storage for tools, adapters and accessories |
Installation Guidelines
- Confirm the rack width and available 1U position
- Check internal cabinet depth and door clearance
- Align the shelf with the selected rack holes
- Secure all required mounting points
- Confirm the shelf is level and stable
- Place equipment centrally on the shelf
- Route cables without tension or sharp bends
- Recheck the fasteners after loading the shelf
Technical Specifications
| Model / SKU | SR2350 |
|---|---|
| Product Type | Fixed vented rack shelf |
| Rack Height | 1U |
| Width | 470 mm / 18.5 in |
| Depth | 350 mm / 13.7 in |
| Height | 45 mm / 1.7 in |
| Steel Thickness | 1.2 mm |
| Material | Cold-rolled steel |
| Shelf Surface | Vented |
| Finish | Black powder coat |
| Maximum Load | Not published—confirm before use |
Frequently Asked Questions
What rack size does the SR2350 fit?
It is designed for compatible standard 19-inch racks and cabinets.
How deep is the shelf?
The listed depth is 350 mm or approximately 13.7 inches.
Is it a 1U shelf?
Yes. Its listed height is 45 mm, designed to occupy one rack unit.
Is the surface vented?
Yes. The shelf includes ventilation openings to support airflow around suitable devices.
What material is used?
The shelf is made from 1.2 mm cold-rolled steel with a black powder-coated finish.
What equipment can it support?
It can hold compatible non-rackmount network, AV, security and control equipment that fits safely within the shelf area.
What is the maximum load?
A numerical load capacity is not published in the available specifications. Confirm the approved rating before use.
Should I choose 270, 350 or 420 mm depth?
Choose the shallowest model that fully supports the equipment while leaving enough room for rear connectors, airflow and rack-door clearance.
Complete Your Rack Installation
Compare rack shelf depths and browse compatible cabinets, sliding shelves and rack panels.
Rack Cabinets & Accessories 270 mm Shelf 420 mm Shelf 2U Rack Shelf Sliding Rack Shelf 1U Blank Panel
