Inside our cable management kit, each raceway comes with a hinged plastic enclosure that latches onto one side of the raceway. This allows the enclosure to be easily opened, inserted, removed and managed for installed cables. When the raceway is concealed, the distance between the latch lip. The edge of the hinged side measures to 11/16”, 3/8” at the top of the dome, vertically 1/4” at the edge and 3/16” x 3/16” of space under the latch lip.
Both connectors and raceways parts are made with white plastic which permits the plastic to painted to match one’s walls. All raceways are attached with adhesive foam tape which allows installation on clean dry surfaces and slightly uneven surfaces. To shorten raceways, the pieces may be cut down utilizing a hacksaw.
The kit includes four short and four long raceways (30” - long raceway, 9.25”- short raceway). The kit also includes connections cover to fit almost any circumstance.
- 4 x 30" cable raceway
- 4 x 9 1/4" cable raceway
- 1 x "T" connection cover
- 2 x "L" connection cover
- 3 x straight connection cover
- 1 x outer corner connection cover
- 1 x inner corner connection cover