Description
Press, Speak, Release — Simple Controlled Paging
The CA241215-Q is designed for commercial paging stations where the operator should control exactly when the microphone is active.
Press the push-to-talk control to make an announcement, use the red LED as a clear visual indication that the microphone is active, then release the control when the page is complete. This makes it well suited to reception desks, control stations and single-zone PA systems.
Simple 3-Step Paging Operation
| 1 | Press Activate the microphone using the push-to-talk control. |
| 2 | Speak The red LED provides visual confirmation while the microphone is active. |
| 3 | Release Release the control when the announcement is complete. |
Designed for Operator Control
Typical Single-Zone Paging System
Push-to-Talk Paging Microphone
Ceiling • Wall • Horn Speakers
The microphone provides the voice signal and operator control. The connected amplifier provides speaker power and determines the system configuration.
Where Push-to-Talk Paging Works Well
This model is especially useful where several people work near the paging station or where the microphone should not remain active between announcements.
| Application | Why Push-to-Talk Helps |
|---|---|
| Reception & Front Desk | Staff can activate the microphone only when an announcement is required. |
| Warehouse Supervisor Station | Provides direct operator control for routine facility paging. |
| Retail Customer-Service Counter | Useful for controlled staff or customer announcements from one fixed location. |
| School Administration Office | Gives office staff clear control over when the paging microphone is active. |
| Clinic or Office Paging | Suitable where brief announcements are made from a central staff position. |
Choose the Paging Control You Need
The three AVTECK paging microphones are designed for different operator requirements.
| Requirement | Best Starting Point | Main Benefit |
|---|---|---|
| Straightforward desk paging | TM-C50P | Simple everyday voice announcements |
| Attention tone before paging | TEXONIC CA241215-T | Built-in pre-announcement chime |
| Operator-controlled microphone activation | CA241215-Q | Push-to-talk control with active LED indication |
Key Specifications
| Model / SKU | CA241215-Q |
| Product Type | Single-zone condenser paging microphone |
| Paging Control | Push-to-talk switch |
| Status Indicator | Red active LED |
| Microphone Type | Condenser |
| Frequency Response | 40 Hz – 16 kHz |
| Sensitivity | -40 dB ±2 dB |
| Output Impedance | 75 Ω |
| Connections | XLR input / XLR output |
| Power | Compatible 48V phantom power or 3V DC battery power |
| Battery | 2 × AAA batteries, not included |
| Windscreen | Removable foam windscreen included |
| Net Weight | Approx. 0.5 kg / 1.10 lb |
What's Included
Complete the Paging System
Pair the CA241215-Q with a suitable mixer amplifier and commercial speakers based on the coverage area and speaker system being installed.
Mixer Amplifiers Paging & PA Systems View All Paging Microphones
