Description
Create a clean connection point for a 7.1 home theatre system with the TEXONIC S-6907 surround sound wall plate.
The white 3-gang plate combines seven pairs of speaker binding posts, one RCA subwoofer connection and one HDMI port. It helps organize in-wall speaker, subwoofer and video wiring near an AV receiver, television or equipment cabinet.
| Brand / Model | TEXONIC S-6907 |
|---|---|
| Configuration | 7.1 surround sound |
| Speaker Connections | 7 pairs of binding posts |
| Subwoofer Connection | 1 RCA jack |
| Video Connection | 1 HDMI port |
| Faceplate Size | Approximately 6.5 × 4.5 in |
| Installation Format | NEMA 3-gang box or compatible low-voltage mounting bracket |
| Colour | White |
Organized 7.1 Home Theatre Connections
The S-6907 provides a central termination point for seven passive speaker cable runs. Short connection cables can then link the wall plate to the matching outputs on a compatible AV receiver or power amplifier.
The RCA jack creates a separate line-level connection path for a compatible powered subwoofer, while the HDMI port provides a convenient video and audio connection through the same wall-plate location.
Key Features
- Seven speaker terminal pairs for a 7-channel layout
- One RCA connection for a compatible powered subwoofer
- One HDMI port integrated into the wall plate
- 3-gang design keeps audio and video connections together
- Clearly organized speaker terminal arrangement
- White finish suits common residential wall treatments
- Fits a NEMA 3-gang box or low-voltage mounting bracket
- Two faceplate screws included
Understanding the 7.1 Layout
A conventional 7.1 system uses seven passive speaker channels and one powered subwoofer signal. The S-6907 provides the corresponding speaker and RCA connection points in one plate.
| Plate Section | Quantity | Connection |
|---|---|---|
| Left Side | 3 pairs | Speaker binding posts |
| Centre | 1 pair | Speaker binding posts |
| Right Side | 3 pairs | Speaker binding posts |
| Subwoofer | 1 jack | RCA connection |
| Audio/Video | 1 port | HDMI connection |
HDMI Installation Planning
The complete HDMI path includes the source device, receiver or switch, wall-plate connections, in-wall cable and display. Every part of the path must support the required video and audio format.
Keep the HDMI cable run as direct as practical and avoid sharp bends or excessive connector strain. Test the complete signal path before closing the wall or permanently placing the equipment.
Recommended Applications
| Application | Typical Use |
|---|---|
| Dedicated Home Theatre | Central connection point for seven speakers, a subwoofer and HDMI |
| Living Room Media System | Neat wiring behind or beside an entertainment cabinet |
| AV Equipment Closet | Transition between permanent in-wall wiring and equipment cables |
| Renovation or New Construction | Finished termination for pre-wired speaker, subwoofer and HDMI lines |
Compare Wall Plate Configurations
| Model | Connections | Best Selection |
|---|---|---|
| S-4012 | 5.1 surround sound | Five speaker channels and one subwoofer path |
| S-6907 | 7.1 plus HDMI | Seven speakers, one subwoofer path and HDMI |
| S-4013 | 8 speaker pairs + 2 RCA | Larger speaker layouts with two subwoofer paths |
Installation Checklist
- Confirm the system requires seven speaker circuits and one subwoofer path
- Confirm the HDMI port suits the required signal format
- Choose a location near the AV receiver or equipment cabinet
- Install a compatible 3-gang box or low-voltage bracket
- Label all speaker, RCA and HDMI cable runs
- Maintain consistent speaker polarity
- Avoid sharp bends and tension on the HDMI cable
- Secure the faceplate using the included screws
- Test all speaker channels, subwoofer audio and HDMI before completion
Technical Specifications
| Brand | TEXONIC |
|---|---|
| Model / SKU | S-6907 |
| Product Type | Surround sound and HDMI wall plate |
| Audio Configuration | 7.1 channels |
| Speaker Terminals | 7 pairs of binding posts |
| Speaker Terminal Layout | 3 pairs left, 3 pairs right and 1 centre pair |
| Subwoofer Connection | 1 RCA jack |
| HDMI Connection | 1 port; version and resolution not published |
| Gang Size | 3-gang |
| Faceplate Dimensions | Approximately 6.5 × 4.5 in |
| Mounting Format | NEMA 3-gang box or compatible low-voltage mounting bracket |
| Colour | White |
What’s Included
- TEXONIC S-6907 white 3-gang 7.1 wall plate
- 2 faceplate mounting screws
Frequently Asked Questions
How many speaker connections are included?
The S-6907 includes seven pairs of speaker binding posts.
Does it include a subwoofer connection?
Yes. One RCA jack is provided for a compatible powered subwoofer signal path.
What HDMI version does it support?
The available specifications do not identify an HDMI version, resolution or refresh-rate rating. Confirm compatibility before installation.
Does the plate power the speakers?
No. It is a passive connection panel. A compatible receiver or amplifier must power the passive speakers.
What mounting box is required?
Use a compatible NEMA 3-gang box or low-voltage mounting bracket.
Are the mounting screws included?
Yes. The package includes two faceplate screws.
Complete Your Home Theatre Wiring
Compare surround-sound wall plates and find speaker, subwoofer and HDMI cables for compatible installations.
5.1 Wall Plate 8.2 Wall Plate Speaker Cables Subwoofer Cables HDMI Cables Wall Plates & Cable Management
